Abstract:
งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาหาวัสดุภายในประเทศไทยที่เหมาะสมในการนำมาเป็นตัวกลางสำหรับกระบวนการอนาม็อกซ์ โดยการเปรียบเทียบประสิทธิภาพของเชื้อกลุ่มอนาม็อกซ์ ในการกำจัดไนโตรเจนขณะยึดเกาะบนตัวกลางดังกล่าว และพัฒนาตัวกลางที่ถูกคัดเลือกจากขั้นก่อนหน้าให้มีประสิทธิภาพมากขึ้น และเปรียบเทียบประสิทธิภาพในการกำจัดไนโตรเจนของตัวกลางที่ผ่านการดัดแปลงกับตัวกลางชนิดเดียวกันที่ไม่ผ่านการดัดแปลง การศึกษานี้แบ่งเป็น 3 ชุดการทดลองคือ 1) ศึกษาหาตัวกลางที่เหมาะสมที่สุดจากทั้งหมด 5 วัสดุ คือ ฟองน้ำโพลียูรีเทนเนื้อละเอียดและหยาบ ฟองน้ำเมลามีน สก็อตไบร์ท และ ใยบวบ 2) ปรับปรุงตัวกลางที่เหมาะสมที่สุดที่ได้จากการทดลองชุดที่ 1 ให้มีประสิทธิภาพมากขึ้น และ 3) เปรียบเทียบประสิทธิภาพการกำจัดไนโตรเจนของการใช้ตัวกลางที่ดัดแปลงแล้วกับก่อนการดัดแปลงและ เชื้อแบบแขวนลอย โดยผ่านการถูกยับยั้งด้วยเมทานอล ผลการทดลองชุดแรก พบว่าถังที่ใช้ฟองน้ำโพลียูรีเทนเนื้อละเอียดเป็นตัวกลางมีประสิทธิภาพในการกำจัดไนโตรเจนได้มากที่สุด โดยมีอัตราการกำจัดอยู่ที่ร้อยละ 87 เนื่องจากผลการวัด Mixed Liquor Volatile Suspended Solids อยู่ที่ 1414 มิลลิกรัมต่อลิตร บ่งบอกถึงปริมาณเชื้อจุลินทรีย์ที่อยู่ในระบบจำนวนมาก ผลชุดการทดลองที่ 2 ฟองน้ำโพลียูรีเทนที่ละเอียดได้ถูกปรับปรุงด้วยการเคลือบเจล PVA-SA โดยวิธีที่เหมาะสมที่ใช้ความเข้มข้นของ PVA ที่ ร้อยละ 8 และของ SA ที่ร้อยละ 1.8 และผลชุดการทดลองสุดท้าย ถังที่ใช้ตัวกลางที่ผ่านการปรับปรุง มีความต้านทานต่อการยับยั้งด้วยเมทานอลที่สูงที่สุด ตามด้วยถังที่ใช้ตัวกลางที่ยังไม่ผ่านการปรับปรุง และถังที่ใช้จุลินทรีย์แขวนลอย ข้อสรุปจากการวิจัยนี้แสดงให้เห็นถึงประโยชน์ของการใช้ตัวกลางที่ผ่านการปรับปรุง สำหรับกระบวนการ Anammox อย่างมีประสิทธิภาพ
This research aims to study suitable materials within Thailand to be used as carriers for Anammox process. The study compares the efficiency of Anaerobic Ammonium Oxidation (Anammox) microorganisms in nitrogen removal while adhering to these carriers. It also aims to develop carriers selected from previous stages to enhanced performance. The research compares the nitrogen removal efficiencies of developed carriers with those that have not undergone development. This study consists of three experimental sets: Set 1: investigates the most suitable carrier from five materials, including fine PU, coarse PU and melamine sponge, scotch brite, and loofah. Set 2: develop the most suitable carrier from Set 1 for higher performance, while Set 3: compares the nitrogen removal efficiency of developed carriers with those before development and with suspended microorganisms that have been inhibited by methanol The results of the first experiment, the reactor of fine PU sponge media exhibited the highest efficiency in nitrogen removal, achieving an 87% removal rate. This efficacy was attributed to the substantial biomass containment, evidenced by a measured mixed liquor volatile suspended solids of 1414 mg/L. In the second phase, the fine PU sponge media was modified with PVA-SA gel coating, with an optimal method using 8% PVA and 1.8% SA concentration. In the final phase, the modified PU reactor exhibited the highest resistance to methanol inhibition, followed by the fine PU sponge reactor and suspended bacteria reactor. These findings suggest the beneficial use of modified PU media for the anammox cultures.